Two components polyurethane glue suitable for the repair of the PVC and PU pneumatic boats.
The surfaces to be bonded must be clean, free of oil, dirt, etc. For cleaning, we recommend the Adeco Cleaner 264 PVC cleaner.
Add 6-8% activator to the adhesive and mix the components first. The product is ready for use for up to 3 hours. Apply the prepared mixture on cleaned surfaces and for less than 20 minutes. Before compressing the adhesive surfaces, they must be re-examined by heating them with a hairdryer or infrared lamp. Keep glued surfaces lightly inspected. The bonded assembly is ready for use for approx. 72 hours.
1. Glue 125ml
2. Activator 10ml
3. Rubber gloves 2 pcs
The product is toxic and may cause drowsiness, skin irritation or eye irritation when in contact with skin or if inhaled. If you experience any of the above symptoms, consult a physician on the packaging or the label of the product.
Use only in well-ventilated areas or outdoors. Keep out of the reach of children. The product and its vapors are highly flammable. Avoid storing them in hot conditions near sparks or naked flames. Smoking is prohibited during the manufacture and use of the adhesive mixture.