A range of manual operated Flush Fitting Automatic Rising Cleats has been developed. The cleat has two positions, stowed and raised ready for use. In the stowed position the entire cleat and base is flush with the deck.
The manual cleat is provided with a control button in the centre of the cross bar. To make the cleat ready for use the control button is depressed. This releases the cleat lock and allows the internal gas struts to drive the cleat top into the ready for use position. The cleat rises at a controlled speed and is locked at the top of its stroke.
The cleat is stowed by pressing the control button and simultaneously pressing the cleat top down. The button can be released once the cleat top has started to descend. The cleat top will automatically lock when the cleat top reaches the stowed position.
The cleat is provided with a sealing system that will prevent water from leaking past the cleat top pillars. The cleat can be provided with an ABS or stainless steel cover for the working parts if required.
Weight : 7.3kg approx. for 300mm length version.
|Bollard pull load